Homeowner

No, in addition to a bond a Contractor’s licence is required. Having just a bond will not allow you to pull permits or work as a Contractor.

A permit is required for design, installation, construction, addition, renovation, alteration, repair, removal, or operation of a plumbing system. A permit is also required for the connection of plumbing systems to communal waterworks. These conditions also apply to rural property.

In a setting under the authority of TSASK:

A permit can be issued to a Journeyperson plumber or a registered Contractor that employs a plumbing Journeyperson. Some jurisdictions may have additional requirements, such as a business licence.

A homeowner can apply for a permit subject to the following restrictions:

1. The plumbing system is not to be connected to a communal waterworks or communal sewage works
2. The single family dwelling unit is intended to be used exclusively for living quarters and will be occupied by the owner

No, permits are dependant on your geographical area.

There are 5 Local Authorities in Saskatchewan:

1. The city of Lloydminster
2. The city of Regina
3. The city of Saskatoon
4. The Global Transportation Hub (GTH)
5. The remainder of the province outside the limits of those listed above are under the authority of the Technical Safety Authority of Saskatchewan (TSASK)

The cities of Lloydminster, Regina, Saskatoon and the GTH operate under a separate agreement. If you live within one of those areas, please contact them for specific requirements.

You can apply for a permit online.

There are four different fee ranges based on the number of connected fixtures:

• 0 – 6 Fixtures: $130.00
• 7 – 16 Fixtures: $185.00
• 17 – 29 Fixtures: $350.00
• 30+ Fixtures: $575.00

Future permit privileges may be denied, and the cause of interest (corrections required) may be registered in the Land Titles Registry against the title to the land.

You may also be denied connection to a communal waterworks system.

Yes, you still require a permit for a rural property with a private water/sewage system.

You can apply for a permit online or call TSASK toll free at 1-866-530-8599.

In addition to the required permit from TSASK, you must apply for a permit at your local Saskatchewan Public Health office for the sewage disposal system as per the Private Sewage Works Regulations.

Legally you can request a copy of any permit for work performed on your property. This applies to all plumbing, gas, or electrical work. If a contractor is unwilling to supply a copy of a permit, please call TSASK toll free at 1-866-530-8599.

These are regulations and codes must be followed:

• National Plumbing Code of Canada 2020
• The Plumbing Regulations

Yes, if the local authority determines that the applicant is unable to perform the installation or construction in a safe and acceptable way.

Contact the inspector in your area using our Inspector Lookup tool. For scheduling we require a minimum of 48 hours (2 business days) notice.

More than one inspection may be required; a new home, for example, will require one inspection for the rough-in (underground, stacks and drains) and another after the fixtures are installed.

 

Yes, this is dependent on the type of construction. Normally the initial inspection is to ensure code compliance of drains, venting and underground.

A second inspection is to ensure proper installation of fixtures including p-traps and water backflow prevention.

A clearance letter is available on request. The owner or contractor can contact the inspector in your area.

Contact the inspector in your area using our Inspector Lookup tool for a partial inspection. Note that there is an additional charge for this.

 

Yes, a permit is required for the connection to a plumbing system. There is a base fee of $130 for this permit, as this is a certified home there is no additional charge for the fixtures.

Yes, normally the inspection is performed at the construction yard and if approved a sticker will be applied. This sticker is verification that the installation meets minimum code requirements.

When placed on a permanent site a second permit is required. This second permit covers the connections of the home to the sewer and water system.

You can simply email us at geis@tsask.ca or give us a call at 1-866-530-8599.

Use our Inspector Lookup tool to find the Plumbing Inspector in your area.

A permit is not required for:

1. The repair or replacement of a valve, faucet, or fixture.
2. The repair of a leak.
3. Forcing out a stoppage if no change in the piping is required.
4. The installation of a water treatment device, underground sprinklers, a domestic dishwashing machine or a laundry machine.

The National Plumbing Code of Canada requires that all appliances, materials and fixtures must meet a minimum standard certified by the Canadian Standards Association (CSA) or another accredited testing agency.

 

The area inspector will issue a correction order to the permit holder (homeowner, Plumbing Journeyperson, or Contractor).

In the case where a Journeyperson or Contractor submitted the permit, the homeowner will be copied on the correction notice. Should the Journeyperson or Contractor fail to make the necessary corrections, the responsibility for the corrections falls to the owner of the building.

A communal waterworks system includes piping and appurtenances used in the supply, collection, treatment, storage, or distribution of water for more than one property. Examples include a water meter from a municipality or a rural water line or drip system supplied by SaskWater or others.

The purpose of a plumbing inspection is to examine ongoing or incomplete plumbing systems and work to ensure compliance with the Act or regulations under the Act.

A plumbing system includes the whole or any part of a drainage system, a venting system, or a water system, but it does not include private sewage works.

Private sewage works are defined by The Private Sewage Works Regulations.

The term “immediate family” is defined as father, mother, father-in-law, mother-in-law, spouse, common-law spouse, brother, sister, brother-in-law, sister-in-law, son, daughter, son-in-law, daughter-in-law, grandparent, or grandparent-in-law.

They must hold a Saskatchewan Electrical Journeyperson licence to perform work under your homeowner permit. You will need to provide their Saskatchewan Electrical Journeyperson licence number. Red Seal or other provincial licences are not accepted on their own.

It is an inspection of any wiring installation prior to finishing of the walls. (i.e. drywall, wall board, etc.)

A structure used as a residential dwelling exclusively for occupancy by one family. Dwellings such as a condominium, duplex, or townhouse that share walls with another dwelling are not considered a single-family dwelling.

All the branch circuit wiring throughout the home and garage (attached or detached), as well as a subpanel if required.

Branch circuits start at the breaker box and extend to the electrical devices connected to the service. Branch circuits are the last part of the circuit supplying electrical devices.

No. Due to the complexity of the work and working with unprotected electrical equipment, a licensed Saskatchewan Electrical Contractor is required to perform the work under the authority of a contractor’s permit.

You can obtain the permit ONLY if you are a licensed Saskatchewan Electrical Journeyperson or if your immediate family member is a licensed Saskatchewan Electrical Journeyperson and is performing the work.

You will be provided with a Homeowner Energization Sticker at the time you receive your homeowner permit. Applying this sticker confirms you have installed the service to the latest codes and standards and that it is ready to be energized by the power company. Arrangements for the disconnect and reconnect are your responsibility through the power company.

No. This is not a part of the single-family detached dwelling and therefore all electrical work must be performed by a licensed Saskatchewan Electrical Contractor under the authority of a contractor’s permit.

No. Licensed Saskatchewan Electrical Contractors are responsible for purchasing and submitting permits for the work they are doing. It is your right to ask the contractor for a copy of the permit.

Yes. Choose the Miscellaneous Wiring section on the permit application.

Yes. A permit is required to ensure that the interconnected wiring and the devices are compatible and installed correctly. If during renovation or repair work, the walls are opened or if cabinetry is removed/replaced, every effort shall be made to ensure that the electrical wiring and circuitry for all outlets are brought up to the current Canadian Electrical Code (CEC). Contact the Electrical Inspector on what is required for the current CEC.

Yes. Permits are required for all electrical work in your home.

Yes, as long as the work being performed on each floor is not more than 50% of the residence. If more than 50%, choose the Complete wiring of home option on the permit application.

Yes. Permits are required for all electrical work in your home.

A permit is required for electrical installation as per the Electrical Inspection Act 1993. Failure to do so may result in the disconnect of the service.

Purchasing a permit entitles you to an inspection. The Electrical Inspector will ensure the work is up to code and is done in a safe manner.

It is the permit holder’s responsibility to contact the Electrical Inspector to arrange the inspection prior to the installation of any wall coverings (drywall, paneling, shiplap, etc.) which would render the wiring inaccessible. The inspector will discuss any further inspections.

Contact the Electrical Inspector using the phone number or email address listed on the permit to arrange for an inspection.

Contact our office. Homeowner permits may be cancelled and refunded up to one year prior to the commencement of work. No refunds will be issued after work commences.

Homeowner permits are valid for 12 months from date of purchase.

Please email us at geis@tsask.ca or call 1-866-530-8599 and we will be happy to help you.

A plumbing permit is required for any alteration, extension, or addition to a plumbing system.

A plumbing permit is not required:

• When a leak is repaired on either the plumbing system or water distribution system, without any alterations or changes to the orientation or design of the plumbing system.
• When a plumbing fixture is replaced, without any alterations to the plumbing system.
• When a washing machine or dishwasher is replaced, or installed, without any required alterations to the plumbing system.
• When an underground sprinkler system, or a water treatment system is installed, without any alterations to the plumbing system. Confirmation on whether your sprinkler system has a backflow preventer requires verification.
• When drain cleaning the plumbing system, if the existing cleanouts are used and the removal process does not necessitate any alterations to the plumbing system.

A homeowner, performing a renovation to an existing plumbing system, of a single-family detached dwelling, that they own and occupy, can apply for a Homeowner Plumbing Permit.

No. A Homeowner Plumbing Permit only applies to a renovation in an existing, owner occupied, residential single-family dwelling. A Homeowner Plumbing Permit does not apply to new construction or a new build.

No. You must reside in the residential property, and it must be an exclusive single unit dwelling.

The property’s intended use must be for the owner’s occupancy, and not to sell or rent out.

No. The Homeowner Plumbing Permit is only valid for a personal residential property that is occupied by the owner, as a single-family dwelling.

A minimum notice of 2 business days, to your area inspector, is required to book an inspection.

No. Plumbing Permits are not transferrable.

Yes. All plumbing must adhere to the code requirements of the currently adopted National Plumbing Code (NPC) of Canada and the Saskatchewan Plumbing Regulations.

 

Links are provided below for the current version of the National Plumbing Code of Canada and the Saskatchewan Plumbing Regulations

National Plumbing Code of Canada 2020, second printing

The Plumbing Code Regulations – Technical Safety Authority Saskatchewan (TSASK)

1. Complete the Homeowner Plumbing Permit application online (tsask.ca)
2. Pay the required fee (specifics can be found on the permit application).
3. Once we receive your completed application and fee, your permit is issued and valid to commence work.

A Homeowner Plumbing Permit is valid for 2 years from the date of origin. The work must commence within 180 days of obtaining the permit.

Your permit will list your area inspector. When your rough-in is complete, and your test is holding, you will then contact your area inspector to arrange for a scheduled inspection of your work.

The owner or a competent person representing the owner must be present at the time of the inspection or testing.

Typically, a rough-in and a final inspection are performed. With some projects, multiple inspections may be required. A re-inspection will be required to review corrections made to a plumbing system that were identified during an initial inspection.

• All waterlines must be installed and connected to the existing water distribution system.
• Valves for the showers/bathtubs must be installed.
• All plumbing drainage and venting must be installed, and supported, as required.
• The plumbing system must be tested as outlined in the National Plumbing Code (NPC). This includes applying an air pressure test or water pressure test to the drainage and venting systems (as per the NPC requirements).  The system must be under test during inspection.
• Necessary striker plate/protection must be applied to all drains, vents, and waterlines where protection against physical damage is required. Any location that a screw, nail, etc. can compromise the piping will require this protection.
• Groundwork plumbing must remain exposed until inspected.

• All plumbing fixtures and associated equipment must be installed and ready for use.
• All fixtures must be certified for use in Canada.
• Any piping, designed for future fixtures, must be sealed with an approved cap or plug, as required.
• Water temperature, at bathtub and shower locations, must not exceed 49° Celsius.
• Cross connection control requirements are met. (ex: hose bibb vacuum breakers are installed)

Any actual or potential connection between a potable water (drinking water) supply and any pipe, vessel, tank, plumbing fixture, equipment, or device through which it is possible for used, polluted or contaminated water or any other substance to enter the potable water system.

There are three separate outcomes, once an inspection has been completed.

1. Acceptable Inspection – work and code compliance is acceptable, continue with the installation.
2. Acceptable (under conditions) – may continue with the installation; certain conditions are required to be met from the homeowner.
3. Corrections are required – re-inspection is required. Work may not commence further.

• Testing requirements of the plumbing system are not met
• Improper configuration and layout of the plumbing system
• Improper drain slope
• Cleanouts, or expansion joints are not installed as required
• Backwater valves not installed as required
• Wrong fittings used in horizontal drainage (tee fitting or 90-degree elbows used when Y or 2 – 45-degree elbows are required)
• Improper support of piping, or groundwork bedding of the pipe
• Trap arms exceeding maximum fall or distance to its vent(s)
• Improper pipe sizing

• The owner must reside at the property.
• The property is your principle residence.
• The property is a single-family dwelling.
• There are no rental units at this property.
• The work is to be performed by the owner.
• If a contractor is enlisted, the contractor must apply for the plumbing permit. A plumbing permit cannot be transferred.
• The work must be completed to meet the requirements of the NPC and Saskatchewan Plumbing Regulations.
• It is your responsibility to phone your local inspector to arrange for an inspection(s). A minimum notice of 2 business days is required.